Specifications

ManualsBrandsAllied Telesyn International Corp ManualsComputer equipmentAT-VP504E FXS (H.323)

111

112

113

114

115

116

117

118

119

120

Chapter 12 - Telephony Configuration Administration Manual (SIP/MGCP Version)

AT-VP504E FXS 106

2. Enable the Call Forward On No Answer by setting the

apaUIServicesPort1CallForwardNoAnswerEnable

variable

to 1.

3. Define the SIP URL to which incoming calls will be forwarded

in the

apaUIServicesPort1CallForwardNoAnswerAddress

variable.

A SIP URL has the following format:

userInfo@host:portNumber

The userInfo part is either a user name or a telephone

number. The host part is either a domain name or an IP

address. A valid SIP URL could be:

18198298749@192.168.0.1:5060

Define the number of phone rings before forwarding the

incoming call in the

apaUIServicesPort1CallForward

NoAnswerNumberOfRingsdigits

variable.

The default value is 3.

Call Waiting There are no specific settings for this service. Please refer to the

AT-VP504E FXS User’s Manual

for more details on how to use it.

Call Transfer –

Supervised

There are no specific settings for this service. Please refer to the

AT-VP504E FXS User’s Manual

for more details on how to use it.

Call Transfer –

Unsupervised

There are no specific settings for this service. Please refer to the

AT-VP504E FXS User’s Manual

for more details on how to use it.

Caller ID on

Call Waiting

There are no specific settings for this service. Please refer to the

AT-VP504E FXS User’s Manual

for more details on how to use it.

Three-Way

Conference

Call

There are no specific settings for this service. However, Allied Telesyn

recommends to set the packetization time to 30 ms for better results.

See “Selecting the Preferred Codec” on page 59 for more details.

Please refer to the

AT-VP504E FXS User’s Manual

for more details on

how to use the three-way conferencing feature.

Note: You can repeat the same process for each port of the

AT-VP504E FXS.