Specifications

Chapter 12 - Telephony Configuration Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 105
To set the Call Forward On Busy feature:
1. Locate the apaUIServicesPort1CallForwardBusyGroup
category of the Provisioning MIB.
This group contains all of the variables required to set the Call
Forward On Busy feature.
2. Enable the Call Forward On Busy by setting the
apaUIServicesPort1CallForwardBusyEnable variable to 1.
3. Define the SIP URL to which incoming calls will be
automatically forwarded in the
apaUIServicesPort1Call
ForwardBusyAddress
variable.
A SIP URL has the following format:
userInfo@host:portNumber
The userInfo part is either a user name or a telephone
number. The host part is either a domain name or an IP
address. A valid SIP URL could be:
18198298749@192.168.0.1:5060
On No Answer
You can forward the incoming calls of your users to a pre-determined
extension within your system if they do not answer their phone.
To set the Call Forward On No Answer feature:
1. Locate the “ apaUIServicesPort1CallForwardNoAnswer
Group
” category of the Provisioning MIB.
This group contains all of the variables required to set the Call
Forward On No Answer feature.
Note: You can repeat the same process for each port of the
AT-VP504E FXS.
Note: The call forward on no answer can only be set up by you. Users
cannot enable it from their telephone.