Specifications

Chapter 12 - Telephony Configuration Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 104
2. Enable the Call Forward Unconditional by setting the
apaUIServicesPort1CallForwardUnconditionalEnable
variable to 1.
3. Define the SIP URL to which incoming calls will be forwarded
in the
apaUIServicesPort1CallForwardUnconditionalAddress
variable.
A SIP URL has the following format:
userInfo@host:portNumber
The userInfo part is either a user name or a telephone
number. The host part is either a domain name or an IP
address. A valid SIP URL could be:
18198298749@192.168.0.1:5060
4.
Define the digits that users will have to dial to start the Call
Forward Unconditional feature in the
apaUIServicesPort1
CallForwardUnconditionalEnableStarNumber
variable.
Users must dial the “*xx” sequence to start the feature on
their telephone, where “xx” is the value attributed in the
current variable. The “xx” value must be between 10 and 99
and different from the value set in Step 5.
5. Define the digits that users will have to dial to stop the Call
Forward Unconditional feature in the
apaUIServicesPort1
CallForwardUnconditionalDisableStarNumber
variable.
Users must dial the “*xx” sequence to disable the feature on
their telephone, where “xx” is the value attributed in the
current variable.
The “xx” value must be between 10 and 99
and different from the value set in Step 4.
On Busy
You can automatically forward the incoming calls of your users to a
pre-determined extension within your system if they are already on the
line.
Note: You can repeat the same process for each port of the
AT-VP504E FXS.
Note: The call forward on busy can only be set up by you. Users
cannot enable it from their telephone.