Specifications

Chapter 12 - Telephony Configuration Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 98
Dial Map Rule #3
This Dial Map rule checks for local calls outside your Area Code (in the
425 Area Code).
apaUIMapRule2RemDigit
Count
1
The first digit “1” in the dial map indicates
a user wants to call outside his/her own
Area Code. It has to be removed because
it does not need to be expressed to the IP
Communication Server. The IP
Communication Server needs only to
know the complete number of the called
party (CC+AC+directory number).
apaUIMapRule2PrefixEnable 1 = Enable
apaUIMapRule2PrefixDigit 1 - Prefix Country code
A valid telephone number must contain a
Country Code, an Area Code, and a
number. The Country Code is missing in
this number and must be added.
Note that in this scenario, the Country
Code is the same code as the code used
when the user wants to indicate a
communication outside of his/her own
Area Code. It is still good practice to have
this number removed and to add the
country code, event if these two numbers
are the same.
Table 43: Dial Map Rules #3 Settings
Variable Setting
apaUIMapRule3Enable 1 = Enable
apaUIMapRule3DialMap 425xxxxxxx
apaUIMapRule3RemDigit
Enable
0 = Disable
apaUIMapRule3PrefixEnable 1 = Enable
Table 42: Dial Map Rules #2 Settings (Continued)
Variable Setting