Specifications

Chapter 12 - Telephony Configuration Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 96
Dial Map Examples The following examples will help you set up various scenarios that
could apply to your situation. You can use up to four (4) Dial Map rules.
Each time a user dials a digit, the number is compared to the rules and,
if there is a match, the number is dialed.
Example 1 –
Standard Calls
Let’s say you are located in Seattle, Washington and you want to
define Dial Map rules for your users. You must consider at least four
possibilities:
You are making a long distance call outside the country.
You are making a long distance call outside your Area
Code.
You are making a local call outside your Area Code (in
the 425 Area Code).
You are making a local call in the same Area Code.
apaUIMapRule1
PrefixEnable
Indicates if digits are to be added to the number dialed
by users when making the call. A complete and valid
telephone number must contain a Country Code, an
Area Code, and a number.
Possible Values:
• 0 = Disable
• 1 = Enable
apaUIMapRule1
PrefixDigit
If the
apaUIMapRule1PrefixEnable variable is enabled,
adds the selected digits to the number dialed by users.
Possible Values:
• 0 - Prefix Area code
• 1 - Prefix Country code
• 2 - Prefix Country code and Area code
Table 40: Dial Map Rules Variables (Continued)
Variable Description
Note: Similar variables apply to the other three dial map rules.