Specifications

Chapter 11 - Signalling Protocol Configuration – SIP Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 87
• sipUAServerDhcpProxyHost
• sipUAServerDhcpProxyPort
3. Set the DHCP Vendor Specific code of the SIP Registrar
Server in the
sipUAServerDhcpRegistrarVendorSpecific
Code
variable.
This code can be any number between 0 and 254. The
default value is 203.
4. Set the DHCP Vendor Specific code of the SIP Proxy Server
in the
sipUAServerDhcpProxyVendorSpecificCode variable.
This code can be any number between 0 and 254. The
default value is 204.
To use static information:
1. In the SIP MIB, locate the sipUAServerUseDhcp variable
(under
sipUAServerGroup ).
This variable defines whether the AT-VP504E FXS must get
its SIP Server configuration through a DHCP Server or not.
2. Set the sipUAServerUseDhcp variable to 0=Static.
3. Set the following variables:
Table 36: SIP Server Static Address
Variable Description
sipUAServerStaticRegistrar
Host
SIP Registrar server static IP address
or domain name.
Default Value: 192.168.0.10
sipUAServerStaticRegistrarPort SIP Registrar server static IP port
number.
Default Value: 5060
sipUAServerStaticProxyHost SIP Proxy server static IP address or
domain name.
Default Value: 192.168.0.10
sipUAServerStaticProxyPort SIP Proxy server static IP port number.
Default Value: 5060