Specifications

Chapter 11 - Signalling Protocol Configuration – SIP Administration Manual (SIP/MGCP Version)
AT-VP504E FXS 86
To use static information:
1. In the SIP MIB, locate the sipUALogUseDhcp variable (under
sipUALogGroup ).
This variable defines whether the AT-VP504E FXS must ask
for its SIP Log settings through a DHCP server or not.
2. Set the sipUALogUseDhcp variable to 0=Static.
3. Set the following variables:
Setting up SIP
User Agents Serv-
ers
The SIP stack uses two types of servers that have their specific tasks:
the Registrar server and Proxy server.
DHCP vs. Static
Configuration
The SIP servers information can be assigned through a DHCP server
or set statically.
To use DHCP-assigned information:
1. In the SIP MIB, locate the sipUAServerUseDhcp variable
(under
sipUAServerGroup ).
This variable defines whether the AT-VP504E FXS must get
its SIP Server configuration through a DHCP Server or not.
2. Set the sipUAServerUseDhcp variable to 1=DHCP.
You can query the SIP Server’s IP address and port number
assigned by the DHCP server in the following read-only
variables:
• sipUAServerDhcpRegistrarHost
• sipUAServerDhcpRegistrarPort
Table 35: SIP Logging Client Static Address
Variable Description
sipUALogStaticHost SIP Logging Client static IP address or domain
name.
Default Value: 192.168.0.10
sipUALogStaticPort SIP Logging Client static IP port number.
Default Value: 6000