User`s guide

AT-S41 User’s Guide
202
For example, if you wanted to make Port 5 an untagged port of a
VLAN with a VID of 7, you would change the PVID for Port 5 to the
value 7.
4. Click the Apply button.
Once a new PVID has been assigned to a port, the port is an untagged
member of that VLAN and only that VLAN.
If the port is also an tagged member of any VLANs, it remains as a
tagged member of those VLANs.
5. Repeat steps 2 and 4 to assign new PVIDs to any other ports in the
stack that are to be untagged members of the new VLAN.
This completes the procedure for creating a new VLAN. To
confirm the creation of the new VLAN, go to the next procedure.