User`s guide

Chapter 9: Port Trunking Commands
84
DESTROY SWITCH TRUNK
Syntax
destroy switch trunk=name
Parameter
trunk Specifies the name of the trunk to be deleted. (You
can enter any alphanumeric character for the name
and this command will still work. This is useful if you
forgot the name you assigned the trunk.)
Description
This command deletes the port trunk from a switch. Once a port trunk
has been deleted, the ports that made up the trunk can be connected to
different end nodes.
Caution
Disconnect all data cables from the ports of the trunk on the switch
before using this command. Deleting a port trunk without first
disconnecting the cables may result in loops in your network
topology, which can produce broadcast storms and poor network
performance.
Example
The following command deletes the trunk from the switch:
destroy switch trunk=a