Manualshelf

User`s guide

ManualsBrandsAllied Telesyn International Corp ManualsComputer equipmentAT-S39
31323334353637383940
AT-S39 Command Line Interface User’s Guide
33
RESTART SWITCH
Syntax
restart switch
Parameter
None.
Description
This command resets the switch. The system reset will take only a few
seconds. The unit will not forward traffic during time required to reload
the operating software. Some network traffic may be lost.
Caution
Be sure to use the SAVE CONFIGURATION command to save your
changes before resetting the switch. Any changes not saved will be
lost.
Example
The following command resets the switch:
restart switch