User`s guide

Chapter 21: Command Reference
186
SNMP Community Strings and Trap Commands
ADD SNMP COMMUNITY TRAPHOST
add snmp community=”community” traphost=ipaddress
Adds to a community string the IP address of a management
workstation to receive management traps from the switch.
CREATE SNMP COMMUNITY
create snmp community=”community”
access=read|write [traphost=ipaddress]
Creates a new Read or Write community string on the switch.
DELETE SNMP COMMUNITY TRAPHOST
delete snmp community=”community”
traphost=ipaddress
Deletes the IP address of a management workstation that is not to
receive traps from the switch.
DESTROY SNMP COMMUNITY
destroy snmp community=”community”
Deletes the Read or Write community string from the switch.
RESET SNMP
reset snmp
Returns the SNMP community strings to the default values, disables
SNMP access, and deletes the IP addresses of trap receivers.
SET SNMP COMMUNITY
set snmp community=”community” access=read|write
Changes the access level of an existing community string on the switch.
SHOW SNMP
show snmp
Displays the SNMP community strings.