User`s guide

Chapter 20: Download and Upload Commands
180
Xmodem Examples
The following command uploads the switch’s configuration file to the
management workstation:
upload method=xmodem type=config
After entering the command, use your terminal emulator program to
indicate where you want to store the file on your workstation and the
filename.
The following command uploads the switch’s AT-S39 image to the
management workstation:
upload method=xmodem type=image
TFTP Example
The following command uploads a switch’s configuration file using
TFTP:
upload method=tftp type=config
You are prompted for the IP address of the TFTP server.