User`s guide

Chapter 13: VLAN Commands
130
SET SWITCH SWITCHMODE
Syntax
set switch switchmode=tagged|basic
Parameters
vlanmode Specifies the switch’s mode. Specifying TAGGED
means the switch will support user-configured (port-
based and tagged) and multiple (801.Q compliant and
non-801.Q compliant) VLANs. Specifying BASIC means
the switch will support the Basic switch mode. The
default is tagged. Only one mode can be active on a
switch at a time.
Description
This command configures a switch to support port-based and tagged
VLANs or the Basic mode.
Example
The following command configures the switch to support the Basic
mode:
set switch switchmode=basic