User`s guide

AT-S39 User’s Guide
95
Deleting a Port Mirror
To delete a port mirror, perform the following procedure:
1. From the Main Menu, type 1 to select Port Menu.
2. From the Port Menu, type 2 to select Port Mirroring.
The Port Mirroring menu is shown in Figure 23 on page 94.
3. Type 1 to select Mirror (Destination) Port.
The following prompt is displayed.
Enter mirror port (0=None) [0 to 24] ->
4. Enter 0 and press Return.
The port mirror on the switch is deleted. The port that was
functioning as the port mirror is now available for normal network
operations.
5. Type S to select Save Configuration Changes.