User`s guide

Section II: Local and Telnet Management
60
Figure 9 is an example of the enhanced stacking feature.
Figure 9 Enhanced Stacking Example
The example consists of a network of two subnets interconnected with a
router. Each subnet consists of one enhanced stack. Two switches in
each subnet have been selected as master switches of the enhanced
stacks, and each has been assigned a unique IP address.
To manage the switches of an enhanced stack, you could start a local or
a remote management session with one of the master switches in the
enhanced stack. You would then have management access to all the
enhanced stacking switches in the same stack.
FAULT
MASTER
PWR
RS-232 TERMINAL PORT
Subnet A
Subnet B
Master 2
149.32.11.16
IP Address
Master 1
149.32.11.22
IP Address
Master 1
149.32.09.18
IP Address
Master 2
149.32.09.24
IP Address
Router