User`s guide

AT-S39 User’s Guide
247
Configuring an IP Address and Switch Name
Note
For guidelines on when to assign an IP address, subnet address, and
gateway address to an AT-8000 Series switch, refer to When Does a
Switch Need an IP Address? on page 39.
To set the IP address, subnet mask, and other basic information for an
AT-8000 Series switch, perform the following procedure:
1. From the Home Page, select Configuration.
The Configuration menu is displayed with the System menu
option selected by default.
2. If the System menu option is not selected, select it and then select the
General tab.