User`s guide

Section II: Local and Telnet Management
178
Note
The tagged information in a frame is not changed as the frame
traverses the switch. A tagged frame leaves a switch with the same
priority level that it had when it entered.
The default for this parameter is No, meaning that the priority
level of tagged frames is determined by the priority level specified
in the frame itself.
7. Type C to select Configure Port VLANS & Priorities.
8. Type S to select Save Configuration Changes.
9. Repeat this procedure to configure CoS on other ports on the switch.
Note
To view the priority queue assignment for each port and the
override priority status, refer to Displaying PVIDs and Priorities on
page 148.