Specifications

Operations Manual

Enter the letter E for Ethernet parameters to access the following

submenu:

NOTE

All changes to Ethernet parameters require a system reset to be activated.

Your switch offers the choice of store-and-forward (the default) or

cut-through switching strategies. In store-and-forward, the switch stores the

entire packet before it is forwarded.

The Ethernet parameters screen shows the current choices for

forwarding and for LED modes of operation. At the bottom you see a list of

menu options. Each currently conﬁgured choice is highlighted with an

arrowhead (“>”).

Enter the letter S or the letters CU if you wish to change the forwarding

mode. Enter the letter T or the letters CO if you wish to change the LED

mode.