Specifications

Operations Manual
17
Timeout. From the Password screen, press <RETURN> for the Timeout
screen.
Timeout may be useful to avoid connection problems due to multiple sessions
(for example, you may start a local session and not exit the system before
attempting a Telnet session later).
Your switch allows one management session at a time. The
timeout option
will automatically end the session if there is no activity for the length of time
you have specified (in minutes).
That is, if you have entered a value the Activity Monitor subscreen
(accessed by entering the letters AC from the System Administration
menu) will only run until the designated timeout time is reached. The default,
Ø, disables the timeout function.
Remember, if your switch is in session there is no access to a new session until
the present, active session is terminated.
A session may be terminated in any of three ways:
1. Timeout.
2. Rebooting.
3. Normal session termination using the Quit option.