Specifications

6 line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon
10 security/authorization messages
11 FTP daemon
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
local0 – Specifies that local use 0 messages will be sent to the remote host.This corresponds to number 16
from the list above.
local1 – Specifies that local use 1 messages will be sent to the remote host.This corresponds to number 17
from the list above.
local2 – Specifies that local use 2 messages will be sent to the remote host.This corresponds to number 18
from the list above.
local3 – Specifies that local use 3 messages will be sent to the remote host.This corresponds to number 19
from the list above.
local4 – Specifies that local use 4 messages will be sent to the remote host.This corresponds to number 20
from the list above.
local5 – Specifies that local use 5 messages will be sent to the remote host.This corresponds to number 21
from the list above.
local6 – Specifies that local use 6 messages will be sent to the remote host.This corresponds to number 22
from the list above.
local7 – Specifies that local use 7 messages will be sent to the remote host.This corresponds to number 23
from the list above.
udp_port <int> – Specifies the UDP port number that the syslog protocol will use to send messages to the
remote host.
ipaddress <ipaddr> – Specifies the IP address of the remote host where syslog messages will be sent.
state [enable | disable] – Allows the sending of syslog messages to the remote host, specified above, to be
enabled and disabled.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure a syslog host:
AT-9724TS:4# config syslog host 1 severity all facility
local0 ipaddress 10.1.1.24
Command: config syslog host 1 severity all facility
local0 ipaddress 10.1.1.24
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
64
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual