Specifications

show ospf all
Purpose Used to display the current OSPF settings of all the OSPF interfaces on the Switch.
Syntax show ospf all
Description This command will display the current OSPF interface settings for all OSPF interfaces on the Switch interfaces
on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the current OSPF interface settings, for all OSPF interfaces on the Switch:
AT-9724TS:4# show ospf all
Command: show ospf all
Interface Name: S y s t e m IP Address: 10.42.73.10/8 (Link Up)
Network Medium Type: BROADCAST M e t r i c : 1
Area ID: 0 . 0 . 0 . 0 Administrative State: E n a b l e d
P r i o r i t y : 1 DR State: D R
DR Address: 1 0 . 4 2 . 7 3 . 1 0 Backup DR Address: N o n e
Transmit Delay: 1 Retransmit Time: 5
A u t h e n t i c a t i o n : N o n e
Interface Name: i p i f 2 IP Address: 123.234.12.34/24 ((Link Up)
Network Medium Type: BROADCAST M e t r i c : 1
P r i o r i t y : 1 DR State: D R
DR Address: 1 2 3 . 2 3 4 . 1 2 . 3 4 Backup DR Address: N o n e
Transmit Delay: 1 Retransmit Time: 5
A u t h e n t i c a t i o n : N o n e
Total Entries: 2
A T - 9 7 2 4 T S : 4 #
264
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual