Specifications

show ospf ipif
Purpose Used to display the current OSPF interface settings for the specified interface name.
Syntax show ospf ipif {<ipif_name 12>}
Description This command will display the current OSPF interface settings for the specified interface name.
Parameters <ipif_name 12> – The IP interface name for which you want to display the current OSPF interface settings.
Restrictions None.
Example usage:
To display the current OSPF interface settings, for a specific OSPF interface:
AT-9724TS:4# show ospf ipif ipif2
Command: show ospf ipif ipif2
Interface Name: i p i f 2 IP Address: 123.234.12.34/24 (Link Up)
Network Medium Type: BROADCAST M e t r i c : 1
P r i o r i t y : 1 DR State: D R
DR Address: 1 2 3 . 2 3 4 . 1 2 . 3 4 Backup DR Address: N o n e
Transmit Delay: 1 Retransmit Time: 5
A u t h e n t i c a t i o n : N o n e
Total Entries: 1
A T - 9 7 2 4 T S : 4 #
263
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual