Specifications

show ospf neighbor
Purpose Used to display the current OSPF neighbor router table.
Syntax show ospf neighbor {<ipaddr>}
Description This command will display the current OSPF neighbor router table.
Parameters <ip_addr> – The IP address of the neighbor router.
Restrictions None.
Example usage:
To display the current OSPF neighbor router table:
AT-9724TS:4# show ospf neighbor
Command: show ospf neighbor
OSPF Area Aggregation Settings
I P Address of Router ID of N e i g h b o r N e i g h b o r
N e i g h b o r N e i g h b o r P r i o r i t y S t a t e
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 0 . 4 8 . 7 4 . 1 2 2 1 0 . 2 . 2 . 2 1 I n i t i a l
A T - 9 7 2 4 T S : 4 #
show ospf virtual neighbor
Purpose Used to display the current OSPF virtual neighbor router table.
Syntax show ospf virtual_neighbor {<area_ID> <neighbor id>}
Description This command will display the current OSPF virtual neighbor router table.
Parameters <area_id> – A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF
area in the OSPF domain.
<neighbor_id> – The OSPF router ID for the neighbor.This is a 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the remote area’s Area Border Router.
Restrictions None.
Example usage:
To display the current OSPF virtual neighbor table:
AT-9724TS:4# show ospf virtual_neighbor
Command: show ospf virtual_neighbor
T r a n s i t Router ID of IP Address of Virtual Neighbor
Area ID Virtual Neighbor Virtual Neighbor S t a t e
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 0 . 1 . 1 . 1 1 0 . 2 . 3 . 4 1 0 . 4 8 . 7 4 . 1 1 1 E x c h a n g e
Total Entries : 1
A T - 9 7 2 4 T S : 4
260
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual