Specifications

create ospf aggregation
Purpose Used to configure OSPF area aggregation settings.
Syntax create ospf aggregation <area_id> <network_address>
lsdb_type summary {advertise [enable | disable]}
Description This command is used to create an OSPF area aggregation.
Parameters <area_id> – A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF
area in the OSPF domain.
<network_address> – The 32-bit number in the form of an IP address that uniquely identifies the network that
corresponds to the OSPF Area.
lsdb_type summary – The type of address aggregation.
advertise [enable | disable] – Allows for the advertisement trigger to be enabled or disabled.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an OSPF area aggregation:
AT-9724TS:4# create ospf aggregation 10.1.1.1
10.48.76.122/16 lsdb_type summary advertise enable
Command: create ospf aggregation 10.1.1.1 10.48.76.122/16
lsdb_type summary advertise enable
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
delete ospf aggregation
Purpose Used to delete an OSPF area aggregation configuration.
Syntax delete ospf aggregation <area_id> <network_address> lsdb_type summary
Description This command is used to delete an OSPF area aggregation configuration.
Parameters <area_id> – A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF
area in the OSPF domain.
<network_address> – The 32-bit number in the form of an IP address that uniquely identifies the network that
corresponds to the OSPF Area.
lsdb_type summary – Specifies the type of address aggregation.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete an OSPF area aggregation configuration:
AT-9724TS:4# delete ospf aggregation 10.1.1.1
10.48.76.122/16 lsdb_type summary
Command: delete ospf aggregation 10.1.1.1 10.48.76.122/16
lsdb_type summary
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
257
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual