Specifications

config ospf host_route
Purpose Used to configure OSPF host route settings.
Syntax config ospf host_route <ipaddr> {area <area_id> | metric <value>}
Description This command is used to delete OSPF host route settings.
Parameters <ipaddr> – The address of the OSPF host.
<value> – A metric between 1 and 65535 that will be advertised for the route.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure an OSPF host route:
AT-9724TS:4# config ospf host_route 10.48.74.122
area 10.1.1.1 metric 2
Command: config ospf host_route 10.48.74.122
area 10.1.1.1 metric 2
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
show ospf host_route
Purpose Used to display the current OSPF host route table.
Syntax show ospf host_route <ipaddr>
Description This command will display the current OSPF host route table.
Parameters <ipaddr> – The address of the OSPF host.
Restrictions None.
Example usage:
To display the current OSPF host route table:
AT-9724TS:4# show ospf host_route
Command: show ospf host_route
Host Address M e t r i c A r e a _ I D
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 0 . 4 8 . 7 3 . 2 1 2 1 0 . 1 . 1 . 1
1 0 . 4 8 . 7 4 . 1 2 2 1 1 0 . 1 . 1 . 1
Total Entries : 2
A T - 9 7 2 4 T S : 4 #
256
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual