Specifications

create ospf host_route
Purpose Used to configure OSPF host route settings.
Syntax create ospf host_route <ipaddr> {area <area_id> | metric <value 1-65535>}
Description This command is used to configure the OSPF host route settings.
Parameters <ipaddr> – The host’s IP address.
<area_id> – A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF
area in the OSPF domain.
metric <value 1-65535> – A metric between 1 and 65535, which will be advertised.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the OSPF host route settings:
AT-9724TS:4# create ospf host_route 10.48.74.122 area
10.1.1.1 metric 2
Command: create ospf host_route 10.48.74.122 area 10.1.1.1
metric 2
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
delete ospf host_route
Purpose Used to delete an OSPF host route.
Syntax delete ospf host_route <ipaddr>
Description This command is used to delete an OSPF host route.
Parameters <ipaddr> – The address of the OSPF host.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete an OSPF host route:
AT-9724TS:4# delete ospf host_route 10.48.74.122
Command: delete ospf host_route 10.48.74.122
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
255
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual