Specifications

show ipmc
Purpose Used to display the IP multicast interface table.
Syntax show ipmc {ipif <ipif_name 12> | protocol [inactive | dvmrp | pim}
Description This command will display the current IP multicast interface table.
Parameters <ipif_name 12> – The name of the IP interface for which you want to display the IP multicast interface table for.
protocol – Allows the user to specify whether or not to use one of the available protocols to display the IP
multicast interface table. For example, if DVMRP is specified, the table will display only those entries that are
related to the DVMRP protocol.
inactive – Specifying this parameter will display entries that are currently inactive.
dvmrp – Specifying this parameter will display only those entries that are related to the DVMRP
protocol.
pim – Specifying this parameter will display only those entries that are related to the PIM protocol.
Restrictions None.
Example usage:
To display the current IP multicast interface table by DVMRP entry:
AT-9724TS:4# show ipmc protocol dvmrp
Command: show ipmc protocol dvmrp
Interface Name I P A d d r e s s Multicast Routing
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
S y s t e m 1 0 . 9 0 . 9 0 . 9 0 D V M R P
Total Entries: 1
A T - 9 7 2 4 T S : 4 #
247
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual