Specifications

show pim neighbor
Purpose Used to display PIM neighbor router table entries.
Syntax show pim neighbor {ipif <ipif_name 12> | ipaddress <network_address>}
Description This command will list current entries in the PIM neighbor table for a specified IP interface or destination
router IP address.
Parameters ipif <ipif_name 12> – The name of an IP interface for which you want to view the PIM neighbor router table.
ipaddress <network_address> – The IP address and netmask of the destination routing device for which you want
to view the neighbor router table.You can specify the IP address and netmask information using the traditional
format or the CIDR format. For example, 10.1.2.3/255.255.0.0 or 10.2.3.4/16.
If no parameters are specified, all PIM neighbor router tables are displayed.
Restrictions None.
Example usage:
To display PIM settings as configured on the Switch:
AT-9724TS:4# show pim neighbor
Command: show pim neighbor
P I M Neighbor Address Table
Interface Name Neighbor Address Expire Time
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
S y s t e m 1 0 . 4 8 . 7 4 . 1 2 2 5
Total Entries: 1
A T - 9 7 2 4 T S : 4 #
show pim
Purpose Used to display current PIM configuration.
Syntax show pim {ipif <ipif_name 12>}
Description This command will list current PIM configuration settings for a specified IP interface or all IP interfaces.
Parameters ipif <ipif_name 12> – The name of an IP interface for which PIM settings are listed.
If no parameters are specified, all PIM neighbor router tables are displayed.
Restrictions None.
Example usage:
To display PIM settings as configured on the Switch:
AT-9724TS:4# show pim
Command: show pim
P I M - D M Interface Table
I n t e r f a c e IP Address H e l l o J o i n / P r u n e S t a t e
I n t e r v a l I n t e r v a l
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
S y s t e m 1 0 . 9 0 . 9 0 . 9 0 / 8 3 5 6 0
E n a b l e d
Total Entries: 1
A T - 9 7 2 4 T S : 4 #
245
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual