Specifications

enable pim
Purpose Used to enable PIM function on the Switch.
Syntax enable pim
Description This command will enable PIM for the Switch. PIM settings must first be configured for specific IP interfaces
using the config pim command.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable PIM as previously configured on the Switch:
AT-9724TS:4# enable pim
Command: enable pim
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
disable pim
Purpose Used to disable PIM function on the Switch.
Syntax disable pim
Description This command will disable PIM for the Switch.Any previously configured PIM settings will remain unchanged
and may be enabled at a later date with the enable pim command.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable PIM on the Switch:
AT-9724TS:4# disable pim
Command: disable pim
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
244
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual