Specifications

show dnsr
Purpose Used to display the current DNS relay status.
Syntax show dnsr {static}
Description This command is used to display the current DNS relay status.
Parameters static – Allows the display of only the static entries into the DNS relay table. If this parameter is omitted, the
entire DNS relay table will be displayed.
Restrictions None.
Example usage:
To display DNS relay status.
AT-9724TS:4# show dnsr
Command: show dnsr
DNSR Status : Disabled
Primary Name Server : 0.0.0.0
Secondary Name Server : 0.0.0.0
DNSR Cache Status : Disabled
DNSR Static Cache Table Status : Disabled
DNS Relay Static Table
Domain Name IP Address
- - - - - - - - - - - - - - - - - - - - -
w w w . 1 2 3 . c o m . t w 1 0 . 1 2 . 1 2 . 1 2 3
Total Entries : 2
A T - 9 7 2 4 T S : 4 #
235
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual