Specifications

disable dnsr
Purpose Used to disable DNS relay on the Switch.
Syntax disable dnsr {cache | static}
Description This command is used, in combination with the enable dnsr command above, to enable and disable DNS
Relay on the Switch.
Parameters cache – This parameter will allow the user to enable the cache lookup for the DNS rely on the Switch.
static – This parameter will allow the user to enable the static table lookup for the DNS rely on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable status of DNS relay.
AT-9724TS:4# disable dnsr
Command: disable dnsr
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Example usage:
To disable status of DNS relay.
AT-9724TS:4# disable dnsr
Command: disable dnsr
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Example usage:
To disable cache lookup for DNS relay.
AT-9724TS:4# disable dnsr cache
Command: disable dnsr cache
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Example usage:
To disable static table lookup for DNS relay.
AT-9724TS:4# disable dnsr static
Command: disable dnsr static
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
234
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual