Specifications

disable bootp_relay
Purpose Used to disable the BOOTP relay function on the Switch.
Syntax disable bootp_relay
Description This command, in combination with the enable bootp_relay command above, is used to enable and disable
the BOOTP relay function on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the bootp relay function:
AT-9724TS:4# disable bootp_relay
Command: disable bootp_relay
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
show bootp_relay
Purpose Used to display the current BOOTP relay configuration.
Syntax show bootp_relay {ipif <ipif_name 12>}
Description This command will display the current BOOTP relay configuration for the Switch, or if an IP interface name is
specified, the BOOTP relay configuration for that IP interface.
Parameters <ipif_name 12> – The name of the IP interface for which you what to display the current BOOTP relay
configuration.
Restrictions None.
Example usage:
To display bootp relay status:
AT-9724TS:4# show bootp_relay
Command: show bootp_relay
Bootp Relay Status : Disabled
Bootp Hops Count Limit : 4
Bootp Relay Time Threshold : 0
I n t e r f a c e Server 1 Server 2 Server 3 Server 4
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
S y s t e m 1 0 . 4 8 . 7 4 . 1 2 2 1 0 . 2 3 . 1 2 . 3 4 1 0 . 1 2 . 3 4 . 1 2 1 0 . 4 8 . 7 5 . 1 2 1
Total Entries: 1
A T - 9 7 2 4 T S : 4 #
231
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual