Specifications

<start_time hh:mm> – Time is expressed using a 24-hour clock, in hours and minutes.
s_date – Configure the specific date (day of the month) to begin DST.
<end_time hh:mm> – Time is expressed using a 24-hour clock, in hours and minutes.
e_date – Configure the specific date (day of the month) to begin DST.
<start_date 1-31> – The start date is expressed numerically.
offset [30 | 60 | 90 | 120] – Indicates number of minutes to add or to subtract during the summertime.The
possible offset times are 30, 60, 90, 120.The default value is 60.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure daylight savings time on the Switch:
AT-9724TS:4# config dst repeating s_week 2 s_day tue
s_mth 4 s_time 15:00 e_week 2 e_day wed e_mth 10 e_time
15:30 offset 30
Command: config dst repeating s_week 2 s_day tue
s_mth 4 s_time 15:00 e_week 2 e_day wed e_mth 10 e_time
15:30 offset 30
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
show time
Purpose Used to display the current time settings and status.
Syntax show time
Description This will display system time and date configuration as well as display current system time.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To show the time currently set on the Switch’s System clock:
AT-9724TS:4# show time
Command: show time
Boot Time : 2 Jul 2003 10:59:59
Current Time : 10 Jul 2003 01:43:41
Time Zone : GMT +02:30
Daylight Saving Time : Repeating
Offset in Minutes : 60
Repeating From : Apr 2nd Tue 15:00
T o : Oct 2nd Wed 15:30
A n n u a l F r o m : 29 Apr 00:00
T o : 12 Oct 00:00
A T - 9 7 2 4 T S : 4 #
209
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual