Specifications

config sim_group
Purpose Used to add candidates and delete members from the SIM group.
Syntax config sim_group [add <candidate_id 1-100> {<password>} | delete <member_id 1-32>]
Description This command is used to add candidates and delete members from the SIM group by ID number.
Parameters add <candidate_id 1-100> <password> – Use this parameter to change a candidate switch (CaS) to a member
switch (MS) of a SIM group.The CaS may be defined by its ID number and a password (if necessary).
delete <member_id 1-32> – Use this parameter to delete a member switch of a SIM group.The member switch
should be defined by it ID number.
Restrictions Only administrator-level users can issue this command.
Example usage:
To add a member:
AT-9724TS:4# config sim_group add 2
Command: config sim_group add 2
Please wait for ACK...
SIM Config Success !!!
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Example usage:
To delete a member:
AT-9724TS:4# config sim delete 1
Command: config sim delete 1
Please wait for ACK...
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
config sim
Purpose Used to configure role parameters for the SIM protocol on the Switch.
Syntax config sim [{[commander {group_name <groupname 64> | candidate] | dp_interval <sec
30-90> | hold_time <sec 100-255>}]
Description This command is used to configure parameters of switches of the SIM.
Parameters commander – Use this parameter to configure the commander switch for the following parameters:
dp_interval <sec 30-90> – The user may set the discovery protocol interval, in seconds that the
Switch will send out discovery packets. Returning information to the commander switch will include
information about other switches connected to it. (Ex. MS, CaS).The user may set the discovery protocol
interval from 30 to 90 seconds.
hold time <sec 100-255> – Using this parameter, the user may set the time, in seconds, the Switch will
hold information sent to it from other switches, utilizing the discovery interval protocol.The user
may set the hold time from 100 to 255 seconds.
candidate – Used to change the role of a commander switch to a candidate switch.
dp_interval <sec 30-90> – The user may set the discovery protocol interval, in seconds that the
Switch will send out discovery packets. Returning information to the commander switch will include
information about other switches connected to it. (Ex. MS, CaS).The user may set the dp_interval
from 30 to 90 seconds.
hold time <sec 100-255> – Using this parameter, the user may set the time, in seconds, the Switch will
hold information sent to it from other switches, utilizing the discovery interval protocol.The user
may set the hold time from 100 to 255 seconds.
group_name <groupname 64> – Used to update the name of the group. Enter an alphanumeric string
of up to 64 characters to rename the SIM group.
Restrictions Only administrator-level users can issue this command.
201
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual