Specifications

Example usage:
To view SIM neighbors:
AT-9724TS:4# show sim neighbor
Command: show sim neighbor
Neighbor Info Table
P o r t M A C A d d r e s s R o l e
- - - - - - - - - - - - - - - - - - -
2 3 0 0 - 3 5 - 2 6 - 0 0 - 1 1 - 9 9 C o m m a n d e r
2 3 0 0 - 3 5 - 2 6 - 0 0 - 1 1 - 9 1 M e m b e r
2 4 0 0 - 3 5 - 2 6 - 0 0 - 1 1 - 9 0 C a n d i d a t e
Total Entries: 3
A T - 9 7 2 4 T S : 4 #
reconfig
Purpose Used to connect to a member switch, through the commander switch using telnet.
Syntax reconfig [member_id <value 1-32 | exit]
Description This command is used to reconnect to a member switch using telnet
Parameters member_id <value 1-32> – Select the ID number of the member switch the user desires to configure.
exit – This command is used to exit from managing the member switch and will return to managing the
commander switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To connect to the MS, with member id 2, through the CS, using the command line interface:
AT-9724TS:4# reconfig member_id 2
Command: reconfig member_id 2
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
200
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual