Specifications

show auth_session_statistics
Purpose Used to display the current authentication session statistics.
Syntax show auth_session_statistics {ports [<portlist> | all]}
Description The show auth_session statistics command is used to display the current authentication session
statistics of the Switch on a per port basis.
Parameters ports <portlist> – Specifies a range of ports.The port list is specified by listing the lowest switch number and the
beginning port number on that switch, separated by a colon.Then the highest switch number, and the highest
port number of the range (also separated by a colon) are specified.The beginning and end of the port list range
are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port
4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2,port 4 – in numerical order.
all – Specifies that all ports will be viewed.
Restrictions None.
Example usage:
To display the current authentication session statistics for port 16:
AT-9724TS:4# show auth_session_statistics ports 1:16
Command: show auth_session_statistics ports 1:16
Port number: 1 : 1 6
S e s s i o n O c t e t s R x 0
S e s s i o n O c t e t s T x 0
S e s s i o n F r a m e s R x 0
S e s s i o n F r a m e s T x 0
S e s s i o n I d
S e s s i o n A u t h e n t i c M e t h o d Remote Authentication Server
S e s s i o n T i m e 0
S e s s i o n T e r m i n a t e C a u s e S u p p l i c a n t L o g O f f
S e s s i o n U s e r N a m e T r i n i t y
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
183
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual