Specifications

config ssh algorithm

Purpose Used to configure the SSH algorithm.

Syntax config ssh algorithm [3DES | AES128 | AES192 | AES256 | arcfour | blowfish | cast128 |

Description This command allows you to configure the desired type of SSH algorithm used for authentication encryption.

Parameters 3DES – This parameter will enable or disable the Triple_Data Encryption Standard encryption algorithm.

AES128 – This parameter will enable or disable the Advanced Encryption Standard AES128 encryption

algorithm.

AES192 – This parameter will enable or disable the Advanced Encryption Standard AES192 encryption

algorithm.

AES256 – This parameter will enable or disable the Advanced Encryption Standard AES256 encryption

algorithm.

arcfour - This parameter will enable or disable the Arcfour encryption algorithm.

blowfish – This parameter will enable or disable the Blowfish encryption algorithm.

cast128 – This parameter will enable or disable the Cast128 encryption algorithm.

twofish128 – This parameter will enable or disable the twofish128 encryption algorithm.

twofish192 – This parameter will enable or disable the twofish192 encryption algorithm.

MD5 – This parameter will enable or disable the MD5 Message Digest encryption algorithm.

SHA1 – This parameter will enable or disable the Secure Hash Algorithm encryption.

DSA – This parameter will enable or disable the Digital Signature Algorithm encryption.

RSA – This parameter will enable or disable the RSA encryption algorithm.

[enable | disable] – This allows you to enable or disable algorithms entered in this command, on the Switch.

Restrictions Only administrator-level users can issue this command.

Example usage:

To configure the SSH algorithm:

AT-9724TS:4# config ssh algorithm Blowfish enable

Command: config ssh algorithm Blowfish enable

S u c c e s s .

A T - 9 7 2 4 T S : 4 #

159

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual