Specifications

create authen server_group
Purpose Used to create a user-defined authentication server group.
Syntax create authen server_group <string 15>
Description This command will create an authentication server group.A server group is a technique used to group
TACACS/XTACACS/TACACS+ and RADIUS server hosts into user defined categories for authentication using
method lists.The user may add up to eight (8) authentication server hosts to this group using the config
authen server_group command.
Parameters <string 15> – Enter an alphanumeric string of up to 15 characters to define the newly created server group.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create the server group “group_1”:
AT-9724TS:4# create server_group group_1
Command: create server_group group_1
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
config authen server_group
Purpose Used to create a user-defined authentication server group.
Syntax config authen server_group [tacacs | xtacacs | tacacs+ | radius | <string 15>] [add | delete]
server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
Description This command will configure an authentication server group.A server group is a technique used to group
TACACS/XTACACS/TACACS+ and RADIUS server hosts into user defined categories for authentication using
method lists.The user may add up to eight (8) authentication server hosts to this group.
Parameters server_group – The user may define the group by protocol groups built into the Switch
(TACACS/XTACACS/TACACS+/RADIUS), or by a user-defined group previously created using the create
authen server_group command.
tacacs – Use this parameter to utilize the built-in TACACS server protocol on the Switch.
Only server hosts utilizing the TACACS protocol may be added to this group.
xtacacs – Use this parameter to define the protocol if the server host is using the XTACACS
authentication protocol.
tacacs+ – Use this parameter to utilize the built-in TACACS+ server protocol on the Switch.
Only server hosts utilizing the TACACS+ protocol may be added to this group.
radius – Use this parameter to utilize the built-in RADIUS server protocol on the Switch.
Only server hosts utilizing the RADIUS protocol may be added to this group.
<string 15> – Enter an alphanumeric string of up to 15 characters to define the previously
created server group.This group may add any combination of server hosts to it, regardless of
protocol.
[add | delete] – Enter the correct parameter to add or delete a server host from a server group.
server_host <ipaddr> – Enter the IP address of the previously configured server host to add or delete.
protocol - Enter the protocol utilized by the server host.There are four options:
tacas – Use this parameter to define the protocol if the server host is using the TACACS
authentication protocol.
xtacacs – Use this parameter to define the protocol if the server host is using the
XTACACS authentication protocol.
tacacs+ – Use this parameter to define the protocol if the server host is using the
TACACS+ authentication protocol.
radius – Use this parameter to define the protocol if the server host is using the
RADIUS authentication protocol.
Restrictions Only administrator-level users can issue this command.
149
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual