Specifications

delete authen server_host
Purpose Used to delete a user-defined authentication server host.
Syntax delete authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
Description This command is used to delete a user-defined authentication server host previously created on the Switch.
Parameters server_host <ipaddr> - The IP address of the remote server host the user wishes to delete.
protocol – The protocol used by the server host the user wishes to delete.The user may choose one of the
following:
tacacs – Enter this parameter if the server host utilizes the TACACS protocol.
xtacacs – Enter this parameter if the server host utilizes the XTACACS protocol.
tacacs+ – Enter this parameter if the server host utilizes the TACACS+ protocol.
radius – Enter this parameter if the server host utilizes the RADIUS protocol.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a user-defined TACACS+ authentication server host.
AT-9724TS:4# delete authen server_host 10.1.1.121 protocol
t a c a c s +
Command: delete authen server_host 10.1.1.121 protocol
t a c a c s +
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
show authen server_host
Purpose Used to view a user-defined authentication server host.
Syntax show authen server_host
Description This command is used to view user-defined authentication server hosts previously created on the Switch.
The following parameters are displayed:
IP address – The IP address of the authentication server host.
Protocol – The protocol used by the server host. Possible results will include tacacs, xtacacs, tacacs+ and
radius.
Port – The virtual port number on the server host.The default value is 49.
Timeout – The time in seconds the Switch will wait for the server host to reply to an authentication request.
Key – Authentication key to be shared with a configured TACACS+ server only.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To view authentication server hosts currently set on the Switch:
AT-9724TS:4# show authen server_host
Command: show authen server_host
IP Address P r o t o c o l P o r t T i m e o u t R e t r a n s m i t K e y
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 0 . 5 3 . 1 3 . 9 4 T A C A C S 4 9 5 2 - - -
Total Entries : 1
A T - 9 7 2 4 T S : 4 #
148
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual