Specifications

Example usage:
To configure the default method list with authentication methods XTACACS,TACACS+ and local, in that order:
AT-9724TS:4# config authen_enable default method xtacacs
tacacs+ local
Command: config authen_enable default method xtacacs
tacacs+ local
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
delete authen_enable method_list_name
Purpose Used to delete a user-defined method list of authentication methods for promoting normal user level privileges
to Administrator level privileges on the Switch.
Syntax delete authen_enable method_list_name <string 15>
Description This command is used to delete a user-defined method list of authentication methods for promoting user level
privileges to Administrator level privileges.
Parameters <string 15 – Enter an alphanumeric string of up to 15 characters to define the given enable method list the user
wishes to delete.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the user-defined method list “Permit”:
AT-9724TS:4# delete authen_login method_list_name Permit
Command: delete authen_login method_list_name Permit
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
show authen_enable
Purpose Used to display the method list of authentication methods for promoting normal user level privileges to
Administrator level privileges on the Switch.
Syntax show authen_enable [default | method_list_name <string 15> | all]
Description This command is used to delete a user-defined method list of authentication methods for promoting user level
privileges to Administrator level privileges.The window will display the following parameters:
Method List Name – The name of a previously configured method list name.
Priority – Defines which order the method list protocols will be queried for authentication when
a user attempts to log on to the Switch. Priority ranges from 1 (highest) to 4 (lowest).
Method Name – Defines which security protocols are implemented, per method list name.
Comment – Defines the type of Method. User-defined Group refers to server groups defined by
the user. Built-in Group refers to the TACACS/XTACACS/TACACS+ and RADIUS security protocols
which are permanently set in the Switch. Keyword refers to authentication using a technique
INSTEAD of TACACS/XTACACS/TACACS+ and RADIUS which are local (authentication through
the local_enable password on the Switch) and none (no authentication necessary to access any
function on the Switch).
Parameters default – Entering this parameter will display the default method list for users attempting to gain access to
Administrator level privileges on the Switch.
method_list_name <string 15> – Enter an alphanumeric string of up to 15 characters to define the given method
list the user wishes to view.
all – Entering this parameter will display all the authentication login methods currently configured on the
Switch.
Restrictions Only administrator-level users can issue this command.
144
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual