Specifications

show igmp_snooping group
Purpose Used to display the current IGMP snooping group configuration on the Switch.
Syntax show igmp_snooping group {vlan <vlan_name 32>}
Description This command will display the current IGMP snooping group configuration on the Switch.
Parameters vlan <vlan_name 32> – The name of the VLAN for which you want to view IGMP snooping group configuration
information.
Restrictions None.
Example usage:
To show igmp snooping group:
AT-9724TS:4# show igmp_snooping group
Command: show igmp_snooping group
VLAN Name : default
Multicast group : 224.0.0.2
MAC address : 01-00-5E-00-00-02
R e p o r t s : 1
VLAN Name : default
MAC address : 01-00-5E-00-00-09
R e p o r t s : 1
VLAN Name : default
MAC address : 01-00-5E-05-06-07
R e p o r t s : 1
VLAN Name : default
MAC address : 01-00-5E-36-3F-4B
R e p o r t s : 1
VLAN Name : default
MAC address : 01-00-5E-7F-FF-FA
R e p o r t s : 2
VLAN Name : default
MAC address : 01-00-5E-7F-FF-FE
R e p o r t s : 1
Total Entries : 6
A T - 9 7 2 4 T S : 4 #
129
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual