Specifications

show igmp_snooping
Purpose Used to show the current status of IGMP snooping on the Switch.
Syntax show igmp_snooping {vlan <vlan_name 32>}
Description This command will display the current IGMP snooping configuration on the Switch.
Parameters <vlan_name 32> – The name of the VLAN for which you want to view the IGMP snooping configuration.
Restrictions None.
Example usage:
To show igmp snooping:
AT-9724TS:4# show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
Multicast router Only : Disabled
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 260
Route Timeout : 260
Querier State : Disabled
Querier Router Behavior : Non-Querier
S t a t e : Disabled
VLAN Name : vlan2
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Host Timeout : 260
Route Timeout : 260
Querier State : Disabled
Querier Router Behavior : Non-Querier
Total Entries: 2
A T - 9 7 2 4 T S : 4 #
128
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual