Specifications

show router_ports
Purpose Used to display the currently configured router ports on the Switch.
Syntax show router_ports {vlan <vlan_name 32>} {static | dynamic | forbidden}
Description This command will display the router ports currently configured on the Switch.
Parameters <vlan_name 32> – The name of the VLAN on which the router port resides.
static – Displays router ports that have been statically configured.
dynamic – Displays router ports that have been dynamically configured.
forbidden – Displays router ports that have been labeled as forbidden.
Restrictions None.
Example usage:
To display the router ports:
AT-9724TS:4# show router_ports
Command: show router_ports
VLAN Name : default
Static router port : 2:1-2:10
Dynamic router port :
Forbidden Router Port :
Static router port :
Dynamic router port :
Forbidden Router Port :
Total Entries: 2
A T - 9 7 2 4 T S : 4 #
127
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual