Specifications

disable ipif
Purpose Used to disable the configuration of an IP interface on the Switch.
Syntax disable ipif <ipif_name 12> | all
Description This command will disable an IP interface on the Switch, without altering its configuration values.
Parameters <ipif_name 12> – The name previously created to define the IP interface.
all – Entering this parameter will enable all the IP interfaces currently configured on the Switch.
Restrictions None.
Example usage:
To disable the IP interface named “s2”:
AT-9724TS:4# disable ipif s2
Command: disable ipif s2
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
delete ipif
Purpose Used to delete the configuration of an IP interface on the Switch.
Syntax delete ipif <ipif_name 12> | all
Description This command will delete the configuration of an IP interface on the Switch.
Parameters <ipif_name 12> – The name of the IP interface to delete.
all – Entering this parameter will delete all the IP interfaces currently configured on the Switch.
Restrictions None.
Example usage:
To delete the IP interface named “s2”:
AT-9724TS:4# delete ipif s2
Command: delete ipif s2
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
119
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual