Installation guide

AT-9400Ts Stack Installation Guide
101
RJ-45 Twisted Pair Port Pinouts
Figure 45 illustrates the pin layout of an RJ-45 connector and port.
Figure 45. RJ-45 Connector and Port Pin Layout
Table 12 lists the pin signals when a port is operating in the MDI
configuration at 10 or 100 Mbps.
Table 13 lists the pin signals when a port is operating in the MDI-X
configuration at 10 or 100 Mbps.
The MDI/MDI-X setting is established automatically when a port is set to
Auto-Negotiation. If a port’s speed and duplex are set manually, the setting
defaults to the MDI-X setting.
Table 12. MDI Pin Signals - 10 or 100 Mbps
Pin Signal
1TX+
2TX-
3RX+
6RX-
Table 13. MDI-X Pin Signals - 10 or 100 Mbps
Pin Signal
1RX+
2RX-
3TX+
6TX-
Pin 1