User`s guide

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Guide
3-5
disable port <portlist> Disables a port. Even when disabled, the link is available
for diagnostic purposes.
disable sharing <master_port> Disables a load-sharing group of ports.
disable smartredundancy
<portlist>
Disables the smart redundancy feature. If the feature is
disabled, the switch changes the active link only when
the current active link becomes inoperable.
restart port <portlist> Resets autonegotiation for one or more ports by
resetting the physical link.
show ports {<portlist>} collisions Displays real-time collision statistics.
show ports {<portlist>}
configuration
Displays the port configuration.
show ports {<portlist>} info Displays detailed system-related information.
show ports {<portlist>} packet Displays a histogram of packet statistics.
show ports {<portlist>} qosmonitor Displays real-time QoS statistics. For more information on
QoS, refer to Chapter 7.
show ports {<portlist>} rxerrors Displays real-time receive error statistics. For more
information on error statistics, refer to Chapter 13.
show ports {<portlist>} stats Displays real-time port statistics. For more information
on port statistics, refer to Chapter 13.
show ports {<portlist>} txerrors Displays real-time transmit error statistics. For more
information on error statistics, refer to Chapter 13.
show ports {<portlist>} utilization Displays real-time port utilization information. Use the
[Spacebar] to toggle between packet, byte, and
bandwidth utilization information.
Table 3-1
Port Commands
(Continued)
Command Description