User`s guide

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Guide
2-29
Resetting and
Disabling SNMP
To reset and disable SNMP settings, use the commands in Table 2-10.
Table 2-10
SNMP Reset and Disable Commands
Command Description
disable snmp access Disables SNMP on the switch. Disabling SNMP access does not
affect the SNMP configuration (for example, community
strings).
disable snmp traps Prevents SNMP traps from being sent from the switch. Does
not clear the SNMP trap receivers that have been configured.
unconfig management Restores default values to all SNMP-related entries.