User`s guide

Using SNMP

2-28

Displaying

SNMP Settings

To display the SNMP settings configured on the switch, enter the

following command:

show management

This command displays the following information:

❑

Enable/disable state for Telnet, SNMP, and Web access

❑

SNMP community strings

❑

Authorized SNMP station list

❑

SNMP trap receiver list

❑

RMON polling configuration

❑

config snmp delete [<ipaddress>

{<mask>} | all]

Deletes the IP address of a specified SNMP

management station or all SNMP management

stations. If you delete all addresses, any machine

can have SNMP management access to the switch.

config snmp delete trapreceiver

[<ip_address> community <string> | all]

Deletes the IP address of a specified trap receiver or

all authorized trap receivers.

config snmp syscontact <string> Configures the name of the system contact. A

maximum of 255 characters is allowed.

config snmp sysname <string> Configures the name of the switch. A maximum of

32 characters is allowed. The default sysname is the

model name of the device (for example,

Summit1)

. The

sysname

appears in the switch

prompt.

config snmp syslocation <string> Configures the location of the switch. A maximum

of 255 characters is allowed.

Table 2-9

SNMP Configuration Commands

(Continued)

Command Description