User`s guide

Common Commands
2-8
config timezone <gmt_offset> {autodst |
noautodst}
Configures the time zone information to the
configured offset from GMT time. The format of
gmt_offset
is +/- minutes from GMT time.
Specify:
❑
autodst — Enables automatic Daylight
Savings Time change
❑
nosautodst — Disables automatic Daylight
Savings Time change.
The default setting is
autodst
.
config vlan <name> ipaddress
<ip_address> {<mask>}
Configures an IP address and subnet mask for a
VLAN.
enable bootp vlan [<name> | all] Enables BootP for one or more VLANs.
enable idletimeout Enables a timer that disconnects all sessions (both
Telnet and console) after 20 minutes of inactivity.
The default setting is disabled.
enable license [basic_L3 | advanced_L3]
<license_key>
Enables a particular software feature license. Specify
<license_key>
as an integer. This command is
available only on the AT-8550 and AT-8525.
The command
unconfig switch all
does not
clear licensing information. This feature cannot be
disabled once the license is enabled on the switch.
enable telnet Enables Telnet access to the switch.
help Displays a command summary list.
history Displays the previous 49 commands entered on the
switch.
clear session <number> Terminates a Telnet session from the switch.
disable bootp vlan [<name> | all] Disables BootP for one or more VLANs.
disable idletimeout Disables the timer that disconnects all sessions.
Once disabled, console sessions remain open until
the switch is rebooted or you logoff. Telnet sessions
remain open until you close the Telnet client.
disable port <portlist> Disables a port on the switch.
disable telnet Disables Telnet access to the switch.
delete account <username> Deletes a user account.
delete vlan <name> Deletes a VLAN.
Table 2-3
Common Commands
(Continued)
Command Description