User`s guide

Software Factory Defaults
1-8
Software Factory Defaults
Table 1-1 shows factory defaults for global software features.
Table 1-1
Gigabit Switches Global Factory Defaults
Item Default Setting
Serial or Telnet user account
admin
with no password and
user
with no password
Web network management Enabled
SNMP read community string
public
SNMP write community string
private
RMON Disabled
BOOTP Enabled on the default VLAN (
default
)
QoS All traffic is part of the default queue in ingress mode
QoS monitoring Automatic roving
802.1p priority Recognition enabled
802.3x flow control Enabled on Gigabit Ethernet ports
Virtual LANs One VLAN named
default
; all ports belong to the default
VLAN; the default VLAN belongs to the STPD named
s0
802.1Q tagging All packets are untagged on the default VLAN (
default)
Spanning Tree Protocol Disabled for the switch; enabled for each port in the
STPD
Forwarding database aging period 300 seconds (5 minutes)
IP Routing Disabled
RIP Disabled
OSPF Disabled
IP multicast routing Disabled
IGMP snooping Enabled
DVMRP Disabled
GVRP Disabled